Noraxon U.S.A., Inc.
TeleMyo 2400T V2
The sampling frequency field can be set to either 1500 or 3000 Hz. These are the only allowed rates.
When all channels have been selected, turn the switch on the 2400T Transmitter(s) to the “1” position and
press the “Start” button on lower left hand corner of the screen. A wireless communication link will be
established between the transmitter(s) and the Noraxon Wireless PC LAN Card. When the measurement is
initiated, the status indicator on the transmitter(s) will blink at the fast speed of 4Hz. Also, the status
indicator on the PCMCIA receiver will glow green.
Some settings on the transmitter can be controlled by Noraxon software. These settings include Gains, and
Cutoff Filter frequency. When either of these settings are changed, they will become effective when the
next measurement is started. For instruction on how to adjust these setting, please refer to your specific
software’s instruction manual.
P-2308TV2 Rev G (06-06-11)
51