65E Turbo Motor Grader
Service Manual
3
-
7
Service 2.00_2013.03
Section 3
Operator’s Platform and Controls
Installation
Step 1:
Connect a hoist to two cap screws, 22, on the top surface of the cab, 21.
Step 2:
Connect any required ground straps.
Step 3:
Install mirrors, if applicable.
Step 4:
Install floodlights, if applicable.
Step 5:
Install defrost fan, if applicable.
Use a hoist of sufficient lifting capacity for the weight of the cab.
Be sure sufficient clearance exists above the machine to allow
installation.
Step 6:
Carefully lift the cab, 21, and set it down on the machine platform aligning the eight mounting holes.
Step 7:
Attach the cab with eight bolts, 18, washers, 19, and spacers, 20.
Step 8:
Torque the bolts to 198 Nm (146 Ib
-
ft).
Step 9:
Install side seal, 17.
Step 10:
Install rear seal, 16.
Step 11:
Attach left threshold, 6, with screws, 4, and washers, 5.
Step 12:
Attach right threshold, 3, with screws, 1, and washers, 2.
Step 13:
On machines with rear fenders, attach left
-
hand threshold cover plate, 15, with screws, 14, and
attach right
-
hand cover plate, 13, with screws, 12.
Step 14:
Install front floor mat, 10, and rear floor mat, 11.
Step 15:
Install cup holder, 7, with screws, 8, and washers, 9.
Step 16:
Connect all required cables and wires to cab.
Summary of Contents for 65E Turbo Motor Grader
