6505 Gayhart St., Commerce, CA 90040 | Phone: 800.686.6672 | www.noralighting.com | e-mail: [email protected]
Instructions subject to change without notice. © 2018
073118P2
Installation Instructions
SPECIALTY LIGHTING - HIGH OUTPUT LED TAPE LIGHT
READ PRIOR TO ATTEMPTING INSTALLATION
ALWAYS TURN OFF MAIN POWER BEFORE INSTALLATION
INSTALLATION SHOULD BE CARRIED OUT BY YOUR LOCAL ELECTRICIAN
Shrink Wrap Installation Instructions to ensure cULus listing:
1. Have one male and one female end of the tape light.
2. Insert male end of the tape light into the pre-cut shrink wrap supplied by Nora Lighting.
3. Connect the male and female connections inside the shrink wrap. Adjust shrink wrap so both tape lights have sufficient shrink wrap covering
black insulation.
4. Heat the shrink wrap (hair dryer, or flame at least 6" away from tape/shrink wrap) around entire connection to wrap the connection tightly
and maintain cULus listing.
List of driver’s that can be used with NUTP8 Series:
• Meanwell Electronic Driver PLC-100-24
• Meanwell Electronic Driver PLC-60-24
• Meanwell Electronic Driver PLC-30-24
• Meanwell Electronic Driver ELN-60-24
• Meanwell Electronic Driver ELN-30-24
• Magnetic Driver NMT-48/24C2
• Magnetic Driver NMT-60/24C2
• Magnetic Driver NMT-96/24C2
• Magnetic Driver NMT-303/24C2
• GME Wall Plug Electronic Driver GFP451DA
• GME Wall Plug Electronic Driver GFP241DA
• Various Listed Driver
Item No.
Description
Rating
NUTP8-LED
NUTP8-WLED
24V High Output LED Tape Light (Amber Finish)
24V High Output LED Tape Light (White Finish)
24V / 4.2 W/ft
24V / 4.2 W/ft
Fig. 1
Fig. 2
Fig. 3
Fig. 4
