7. The OXYJET GO treatment
7.1. To practise:
7.2. The face treatment „step by step“:
Before you perform a facial treatment, you should familiarize
yourself with the use and operation of the OXYJET GO device.
The inside of your forearm is well suited to practice handling
your device.
For preparation of the treatment cleanse your face with a
mild syndet, cleansing gel, foam or milk as usual. Dry your
skin carefully afterwards.
Then split your face into the following treatment areas:
Eye area
Mouth and lip area
Forehead
1. Turn on the device by pressing the ”ON /OFF“ button. The
”Pulse“ button and the ”Flow“ button now light up blue,
and the LED light ring in the device head is illuminated in
blue. The device is now in SELECT MODE.
2.
„Pulse“ function:
Take the device out of the storage station
and apply the nozzle to the skin of your inner forearm with
gentle pressure. Press the ”Pulse“ button. Now the light of the
”Flow“ button will turn off and the ”Pulse“ button light starts
to blink. Stay on the same skin area for approx. 3 pressure
surges. Now slide on with the nozzle for approx. 1 cm and
stay on the same skin area again for approx. 3 pressure
surges. Proceed in this way so that you treat a skin area
completely. Apply gentle pressure to the skin and slowly slide
over the skin without completely sealing the nozzle. You use
the device properly if you feel a gentle ”clapping“ on your
skin. Now press the ”Pulse“ button again and the device will
stop the pulsation.
3.
„Flow“ function:
Press the ”Flow“ button. Now the light of
the ”Pulse“ button will turn off and the ”Flow“ button light
starts to blink. Slide slowly and gently with short strokes
across the skin on the inside of your forearm. Just place the
nozzle very lightly and work without pressure.
Now press the ”Flow“ button again and the device will stop
the flow.
forehead
eye area
eye area
mouth and lip area
16
17
