www.noovo.co
7
Oct-13
LED
Behavior description
WLAN LED
(Orange)
TVman is connected to your wireless router and transfer the DTV to your
Home WLAN. Connect your mobile device to your WLAN and open the player.
LED solid: TVman is connected to router and available
LED Slow Flashing: TVman is busy transferring DTV to a smart device in the
WLAN. Not available.
LED Fast Flashing: easy pairing on going (WPS)
Hotspot LED
(Blue)
TVman WiFi is available in Hotspot mode. Smart device can be directly
connected to TVman Wi-Fi network.
LED Solid: No Wi-Fi communication on going. TVman is available.
LED Slow Flashing: TVman is busy transferring DTV to a smart device. Not
available.
Power LED
Green
: USB powered or battery charging completed (option)
Solid
Red
: battery is charging (option)
Slow Flashing
Red
: battery low charge (option)
Fast Flashing
Red
: Error
WLAN and Hotpot
Both LED flashing: Firmware upgrade ongoing
All LED
All LED flashing: boot on going
V.
Installation Guide
A.
TV Antenna:
Share antenna with your TV:
If your TV is already equipped with a Terrestrial UHF antenna either on the roof or indoor,
disconnect the antenna from your TV and connect it to the Back of TVman in the antenna “RF IN”
connector. Use the antenna cable provided with TVman to connect the antenna “RF OUT” from
TVman to the TV. The original antenna will be now shared between TVman and your TV. This
method ensures the best reception for your TV and for TVman.
