www.noovo.co
10
Oct-13
VI.
Start Guide
G.
Hotspot mode
In hotspot mode, TVman create its own WiFi. You need to connect your mobile device directly to TVman
WiFi.
1.
Power up TVman by pressing power button for 2 seconds.
2.
Open the Wi-Fi setting of your smart device to connect it to TVman Wi-Fi network (TVmanxxxx)
3.
Open the TVman application on your smart device and wait until connection with TVman is
successful.
4.
At first connection, Frequency scanning is required to display the local broadcasted channel list.
5.
Select channel to watch
H.
WLAN mode
If you want to stream the DTV to your home WLAN, you must first connect TVman to you router by using
the LAN cable or by using TVman WiFi as described here below:
Method 1:
if your wireless router supports WPS function, perform a short press on the TVman
Pairing button and on the router WPS button. Both devices will communicate for few seconds to
exchange the SSID and Password and connect to each other.
Method 2:
connect your Mobile device to TVman in HOTSPOT mode (as described above) and open
the player. Once the player is connected to TVman, Click the setting to enter your home wireless
LAN SSID and password. This information will be sent and stored in TVman memory for automatic
connection during the following boot. Power OFF and power ON TVman.
1.
After boot, TVman will connect automatically to your router and will stream the DTV to your WLAN.
TVman own WiFi will be turn off and cannot be find any more from your Phone.
2.
Connect your Mobile device to your router WLAN.
3.
Open TVman application (TVman player will find TVman through the WLAN network)
4.
Scan frequencies at the first time.
5.
Select a channel to watch.
Important 1:
From that point, TVman will always try to connect on your WLAN after boot. If the wireless
LAN is not available, it will switch automatically to hotspot mode.
