NOOA NOBS1255, Instruction Manual

Page: 6 / 36

9
8
Press the UNIT button at the rear of the scale to select your desired weight unit (kg,lb,st:lb).
The units will be displayed in the LC display. (The default unit is kg)
Changing the weight unit
1. Place the scales on a solid, flat horizontal surface.
Do not place on a carpet or any soft surface. Always
make sure there are no other objects beneath the scale
before weighing.
2. Place even weight on each leg and do not move.
Moving during the weighing process can lead to
discrepancies in the results. The scales will start to
measure immediately. The weight measurement will
be shown and flash on the display.
NOTE: The data will be transfer automatically
to your pair- up mobile or portable device. The
icon will go off
4. When the data transfer is complete, the
icon will go off. The scale will display
the measurement for about 10 seconds and
then automatically switch off. If the data transfer is not
successful, the icon will show on the display and
the measurement will temporarily saved in the scale.
Normal Weighing Mode
After the scale has successfully pair-up with your mobile or
portable device, the measurement data from the scale will
be automatically transferred to your pair-up device. The
icon will be shown on the display to indicate the
data is transferring.
When the data transfer is complete, the icon will go off.
If the data transfer is not successful, the
icon will show on the display and the measurement
will temporarily saved in the scale. The data will be transferred to your pair-up device
when the next measurement is complete. The icon will go off when the data
is transferred successfully. You may check
device.
your personal health data in your pair-up
NOTE: No matter the data has been successful or unsuccessfully transferred,
the scale will automatically switch off in 15 seconds.
The symbol will disappear after data
transmission is complete, and you may check your
personal health data stored in your smartphone.
If the data transmission fails, the symbol will
remain. The pending measurement data will be
temporarily kept in the scale and transmitted to your
smartphone when next measurement is complete.
Data are pending to be
transferred.If the data
transfer is successful,
the symbol will go off.If the
data transfer is not successful,
the symbol will appear.
Data Transfer
Manage Your Health Start Measuring
CAUTION
Interference may occur in the vicinity of equipment marked with the following symbol
and the scale may also interfere with other electrical equipment in the vicinity.
To enable the data transmission to function, the scale should be paired to a Bluetooth 4.0
compatible device.
How to solve possible interference problems?
1. The range between the scale and the Bluetooth device should be reasonably close, from
1to 10 metres. Please ensure no obstacles are between the scale and the Bluetooth device to
obtain a good connection.
2. To avoid interference, other electronic devices (particularly those with Bluetooth transmission /
transmitter) should be kept at least 1 metre away from the scale.
Data are transferring