REPLACING BATTERIES
Depending on the model of your scale, the scale may operated by
one CR2032 (3V) lithium battery or two CR2032 (3V) lithium
batteries (included). Before first use, remove the insulation strip
at the battery compartment.
6
7
GB
PERFORMANCE INDEX
0 . 1 %
0 . 1 %
0 . 1 %
1 5 0 kg
3 3 0 l b
0 . 1 kg
0 . 2 l b
4.0%
~60.0%
27.5%
~66.0%
20.0%
~56.0%
2 kg
4 . 4 l b
Min
Weighing
Capacity
Max
Weighing
Capacity
Division
Fat%
Range
Fat%
Division
Hydration%
Range
Hydration%
Division
Muscle%
Range
Muscle
Division
1. Open the battery compartment cover.
2. Remove the old batteries (if any) using a sharp object as
shown in the picture. Install one CR2032 (3V) lithium battery
or two CR2032 (3V) lithium batteries. Make sure the positive
(+) is facing upwards.
HINT: Make sure one side of the battery is placed underneath
the battery baffle, then push the other side of the battery
until it clicks and secured.
3. Close the battery compartment cover.
Battery baffle
CHANGING WEIGHT UNIT
Depending on the model of your scale, your scale may support
weight units in kg/lb/st.
Press the UNIT button repeatedly at the rear of the scale to
select your desired unit of weight. The units will be displayed
in the LC display.
After the weight unit is confirmed, the scale will automatically
switch off in 3 seconds. The selected unit will be shown on the
display when the scale is switched on again.
HINT: If the weight unit "lb/st" is selected, "feet/inch" is the
default height unit; if the weight unit "kg" is selected, "cm" is
the default height unit.
Press
Press
Press
LCD
LCD
LCD
PRODUCT OVERVIEW
