Nonin CO-Pilot H500, Operator'S Manual

Page: 32 / 68

26
System Operation
Event Marking
NOTE: New patient record can be started when the event mark button is held
for more than 0.5 seconds. Between patients, turn the display off. When the
device is turned on, the display begins a new patient record.
After turning on the system and applying the sensor to the patient:
1. Press the event mark button to place an event mark in the recorded data
2. Verify the event mark on screen increased by ‘1’. The event marker icon
number will increment with each mark event.
Pressing the event marker icon below will place an event number in the data file:
Figure 12. Event Marking
Event
Marker Icon
and number