manualshive.com logo in svg

Nonin 8500, Operator'S Manual, Page: 24 / 33

Share
Download
Nonin 8500 Operator'S Manual Download Page 24

18

Parts and Accessories

Parts and Accessories

For more information about Nonin parts and accessories:

• See the Parts and Accessories List on the Operator’s Manual CD.

• Contact your distributor or Nonin at (800) 356-8874 (USA and Canada), +1 (763) 553 9968, 

or +31 (0)13 - 79 99 040 (Europe).

• Visit www.nonin.com.

Detailed information regarding specific sensor use (patient population, body/tissue, and 
application) can be found in the respective sensor Instructions for Use.

WARNING: The use of accessories, sensors, and cables other than those specified in 
the Parts and Accessories List may result in increased electromagnetic emission and/
or decreased immunity of this device. 

WARNING: Use only with Nonin-branded PureLight

®

 pulse oximeter sensors. These 

sensors are manufactured to meet the accuracy specifications for Nonin Pulse 
Oximeters. Using other manufacturers’ sensors may cause improper pulse oximeter 
performance. Using other manufacturers’ sensors can result in improper pulse 
oximeter performance.

Summary of Contents for 8500


































Reviews:

No comments