Nonin 8000AA Quick Manual Download Page 2

Visit 

nonin.com

 for more information and video tutorials.

Nonin Medical, Inc.

 

13700 1st Avenue North  
Plymouth, MN 55441-5443 • USA 

Tel:

  +1.763.553.9968     

 +1.800.356.8874 

 

Fax:

  +1.763.577.5521   

E-mail:

 [email protected]

Nonin Medical B.V.

Prins Hendriklaan 26 
1075 BD Amsterdam • Netherlands 

Tel: 

+31 (0)13 - 79 99 040  

Fax:

  +31 (0)13 - 79 99 042  

E-mail:

 [email protected] 

nonin.com/sensors

©2013 Nonin Medical, Inc. All trademarks are the property of Nonin Medical, Inc. unless otherwise noted.

ThIs guIde Is for refereNce oNLY. refer to the Instructions for use for complete  

information, warnings, cautions and specifications for the product you are using. 

P/N 9476-101-01

8000AA/AP 

SpO

2

 Clip Sensors

A. 

Use index, middle or ring finger. Rotate finger sites for extended use and comfort 
as needed.

B. 

Do not use on arm with IV line or BP cuff.

C. 

Check sensor position and skin at site every 6 to 8 hours.

D. 

If signal quality is low on the oximeter:

  1. Check sensor position and size for good fit
  2. Check connection at oximeter
  3. Check hand is warm, and has good blood flow
  4. Use a different finger

E.

 Clean sensor between patients or as needed.

  1. Use soft cloth with 10% bleach/90% water solution ( household bleach < 

10% sodium hypochlorite )

  2. Do not use ammonium chloride based cleaning fluids.
  3. Open sensor up to 90 degrees to clean skin contacting surfaces. Do not 

overextend. The spring on the AP model can be released for easier access.

  4. Wipe away from connector plug. Do not submerge or immerse sensor or 

connector plug.

  5. Allow to completely dry before next use.

A short-cable model of the 8000AA Sensor is available  

for use with the WristOx

2

®

 

Model 3150 Pulse Oximeter.

Reviews: