* Sizing is for reference only. Fit, patient comfort and signal quality should be used to determine appropriate size/model.
quick guide
Use only with compatible nonin Medical pulse oximeter monitors.
8000AA /AP
SpO
2
Clip Sensors
3
3
4
Finger Symbol
* Sizing is for reference only. Fit, patient comfort and signal quality should be used to determine appropriate size/model.
1. Select the proper size sensor.*
Adult
8000AA
(blue):
0.5 – 1 in (12.5 – 25.5 mm)
Pediatric
8000AP
(green): 0.3 – 0.5 in
(7.5 – 12.7 mm)
2. Use clean, dry finger where sensor will be
placed.
Heavy lotions, sunscreen, dirt, oils and
nail polish may alter accuracy.
3. Gently squeeze to open the sensor, and insert
the finger all the way into the sensor.
The
finger symbol should be on the top of the finger.
Check that sensor gently hugs finger, and is not
too tight or too loose.
4. Secure sensor to back of hand with medical
tape to allow movement if necessary.
5. Connect to a Nonin pulse oximeter.
Follow
Operator’s Manual for oximeter to measure
oxygen saturation and pulse rate.
8000AA 8000AP
=
mm
25.5
19.12
12.75
6.36
0
inch
1
.75
.5
.25
0
Actual size