4. Menu Window Details
Menu
window
No.
Function
M00
Display POS (positive), NEG (negative) and NET (net) totalizer values. Display
signal strength, signal quality and working status
M01
Display POS totalizer, instantaneous flow rate, velocity, signal strength, signal quality
and working status
M02
Display NEG totalizer, instantaneous flow rate, velocity, signal strength, signal
quality and working status
M03
Display NET totalizer, instantaneous flow rate, velocity, signal strength, signal quality
and working status
M04
Display date and time, instantaneous flow rate, signal strength, signal quality and
working status
M05
Display date and time, velocity, signal strength, signal quality and working status
M06
Display the wave shape of the receiving signal
M07
Display the battery terminal voltage and its estimated lasting time
M08
Display all of the detailed working status, signal strength, signal quality
M09
Display today’s total NET flow, velocity, signal strength, signal quality and working
status
M10
Window for entering the outer perimeter of the pipe
M11
Window for entering the outer diameter of the pipe
Valid range: 0 to 6000mm.
M12
Window for entering pipe wall thickness
M13
Window for entering the inner diameter of the pipe. If pipe outer diameter and wall
thickness are entered correctly, the inner diameter will be calculated automatically,
thus there is no need to change anything in this window.
M14
Window for selecting pipe material
Standard pipe materials (no need to enter the material sound speed) include:
(0) carbon steel (1) stainless steel (2) cast iron (3) ductile iron
(4) copper (5) PVC
(6) aluminum (7) asbestos
(8) fiberglass
M15
Window for entering the sound speed of non-standard pipe materials
M16
Window for selecting the liner material. Select none for pipes without any liner.
Standard liner materials (no need to enter liner sound speed) include:
(1) Tar Epoxy (2) Rubber (3) Mortar (4) Polypropylene
(5) Polystryol (6)Polystyrene (7) Polyester (8) Polyethylene
(9) Ebonite (10) Teflon
M17
Window for entering the sound speed of non-standard liner materials
M18
Window for entering the liner thickness, if there is a liner
M19
Window for entering the roughness coefficient of the pipe inner surface
28