nmas Simple
General
nmas®
is a registered trademark of Nome LTD. nmas
®
is an abbreviation of
Nome Monitoring and Analyzing System.
This manual describes the usage of nmas hardware on unit. More info can be
found at
Version:
1.0
24.05.2016
1.1
05.08.2016
1.2
11.10.2016
1.3
16.12.2016
1.4
27.7.2017
Product description
Nmas is an on-line condition monitoring system. Nmas can be used to monitor
different sensors and signals. System can be used as an individual signal
converter or as a collector and data analyzer.
Safety information
Information in this manual should be followed carefully to avoid electric
hazards and dangerous situations. Misuse of hardware may lead to equipment
or human damage. Wrong settings can lead to false signal scaling,
disinformation or might cause machine failures. Please use professionals for
configuration changes.
Manufacturer recommends twisted and shielded pair cable or other sensor
manufacturer's recommended cable for all the sensor connections.
Do not install the sensor cables near high voltage cables.
Unconnect the sensors from the cables when welding or other high voltage
operations are occuring near the sensors. Make sure that high voltage
operations near the sensors do not damage the sensors.
Manufacturer is not responsible for damages made during installations.
If sensor is not connected, set the channel off to avoid any false diagnosis.
Intended use
Nmas is a condition monitoring device. It has multiple different features so
usage may vary. Nmas should not be used as security device without
consulting the manufacturer.
Page 4
Summary of Contents for nmas Simple
Page 1: ......
