background image

NTG40 

How It Works - Pump™

3

1. Air Chamber

The air chamber is the chamber that houses 
the air which powers the diaphragms.

2. Air Distribution System

The air distribution system is the heart of 
the pump. The air distribution system is the 
mechanism that shifts the pump in order to 
create suction and discharge strokes.

3. Lock Nut (Outer Diaphragm Piston)

The outer diaphragm pistons provide a 
means to connect the diaphragms to the 
reciprocating common shaft and to seal the 
liquid side from the air side of the diaphragm.

4. Holding plate (Inner Diaphragm Piston)

The inner piston is located on the air side of 
the pump and does not come into contact 
with the process fluid.

5. Check Valve Ball

NOMAD air-operated pumps use suction and 
discharge check valves to produce directional 
flow of process fluid in the liquid chamber. 
The check valve balls seal and release on the 
check valve seats allowing for discharge and 
suction of process fluid to occur.

6. Check Valve Seat

The removable seats provide the ball valves a 
site to check.

7. Discharge Manifold

Process fluid exits the pump from the 
discharge port located on the discharge 
manifold at the top of the pump.

8. Liquid Chamber

The liquid chamber is filled with the process 
fluid during the suction stroke and is emptied 
during the discharge stroke. It is separated 
from the compressed air by the diaphragms.

9. Diaphragm

The diaphragm membrane provides for 
separation of the process fluid and the 
compressed air power source. To perform 
adequately, diaphragms should be of 
sufficient thickness and of appropriate 
material to prevent degradation or permeation 
in specific process fluid applications. NOMAD 
offers a variety of diaphragm materials for 
your specific application requirements.

10. Inlet Manifold

Process fluid enters the pump from the intake 
port located on the inlet manifold at the 
bottom of the pump.

The NOMAD diaphragm pump is an air-operated, positive displacement, self-priming pump.  These drawings show flow pattern through the pump 
upon its initial stroke.  It is assumed the pump has no fluid in it prior to its initial stroke.

1

3

2

10

4

9

5

8

7

6

Summary of Contents for NTG40 TRANS-FLO














Reviews: