3
ON/OFF key
Switches the device ON/OFF. Key
is also used to interrupt a running
measurement or the display of
collected measurements.
Pressing and holding this key together with
the (TEMP./MEMORY) key for 3 secs. switches
the device into “TEST MODE”.
MEASURE key
Starts a measurement cycle of
10 seconds. Pressing the key
during a measurement will
extend the measurement with
another 10 seconds.
The key is also used to select the proper
measurement temperature (when function is
activated by the key).
Pressing and holding this key while pressing
the (TEMP./MEMORY) key will start a sensor
calibration.
Overview
6
7
3
4
2
1
5
3
Summary of Contents for NomaSense CO2 P2000
Page 1: ...User Guide ...
Page 11: ...10 ...
