Unpacking Your Fan
Unpack and inspect fan carefully to be certain all contents are included.
1. Blades (5)
2. Canopy assembly
3. Ball/downrod assembly
4. Coupling cover
5. Fan motor assembly
6. Blade arms (5)
7. Light kit
8. Glass shade
9. Balance kit
4
1
2
3
8
9
7
4
5
6
Remote Control
Transmitter
& holder
Receiver
Hardware bag
Wood screws
Wire nuts
Battery
2 pcs
6 pcs
1 pc
Hardware bag
1. Remove the mounting bracket from the canopy by loosening the two
canopy mounting screws located in the “L-shaped” slots.
2. Remove and save the two canopy screws and washers in the round
holes. This will enable you to remove the mounting bracket.
Disassemble the Canopy Assembly
Fig. 1
Warning: Do not use the existing mounting bracket in the
outlet box; replace it with new mounting bracket.
!
Ceiling
mounting
bracket
Canopy
Canopy
mounting
screw
Washer
Blade arm screws
10 pcs
Blade screws
15 pcs
3 pcs
Wire nuts
Hook screws
1 pc
2 pcs
10 pcs
1 pc
Plastic plug
4 pcs
Canopy mounting screws
Spring washers
Mounting screws
