1. Carefully lift the fan motor assembly (without the blades) and
insert the plate of the fan motor assembly into the slot in
the mounting plate as shown in Fig. 4.
2. Secure the safety cable to the building structure using a wood
screw (not included).
You are now ready to make the electrical connections.
Hanging the Fan
Fig. 4
Warning: Turn off the power.
Follow the steps below to hang your fan properly.
!
5
Motor
Slot
Outlet box
Safety cable
Plate
If you feel you do not have enough electrical wiring knowledge
or experience, have your fan installed by a licensed electrician.
Follow the steps below to connect the fan to your household
wiring. Use the wire nuts supplied with your fan. Secure the wire
nuts with electrical tape. Make sure there are no loose strands or
connections.
1. Connect the ground conductor of the 120 V supply (this may
be a bare wire or a wire with green-coloured insulation) to the
green ground lead(s) of the fan. (Fig. 5)
2. Connect the fan motor white wire to the supply white (neutral)
wire using a wire nut. (Fig. 5)
3. Connect the fan motor black wire to the supply black (hot)
wire using a wire nut. (Fig. 5).
4. Connect the blue wire for the light kit to the black (hot) household
supply wire.
5. Turn wire nut connections upward, spreading them apart so
the green (ground) will be on one side of the outlet box and the
white, black and blue wires will be on the other side, and push
carefully up into the outlet box.
Making the Electrical Connections
Fig. 5
Warning: To avoid possible electric shock, be sure
electricity is turned off at the main fuse box before
wiring.
!
Warning: To reduce the risk of electric shock or fire, do not
use this fan with any solid-state fan-speed control device. It
will permanently damage the electronic circuitry.
!
!
Warning: Check to see that all connections are tight, includ-
ing ground, and that no bare wire is visible at the wire nuts,
except for the ground wire.
!
Warning: Electrical diagrams are for reference only.
Optional use of any light kit must be UL listed and marked
"suitable for use with this fan".
SUPPLY CIRCUIT
BLACK WHITE
BLACK WHITE
BLUE
GREEN GREEN
Outlet box
Ground
conductor
Green
ground
lead
Ground from downrod
Ground from
mounting bracket
