11
Tips before Using the Product
Take the SD card out of the Drive recorder. Access the Player.exe menu and enetr the set
up mode, setting time zone, daylight savings time and other settings (as noted in the
programming section of the manual). Re-insert the SD card in the recorder. Following the
installa
ti
on instruc
ti
ons. When you connect the unit to power, or turn the engine on, “dR Init”
appears on the LED display on the unit, indica
ti
ng that the video recorder is ini
ti
alizing. The LED
display window will show a series of numbers, this indicates that GPS satellites are beginning
acquired.
In about 25 seconds a
ft
er power on, longer if one has not set the local
ti
me zone on the SD
card, the unit completes ini
ti
alizing and a “ding dong” chime is heard along with the words
“Hello”. The unit may s
ti
ll show a series of numbers followed by and “GPS FINE” will appears.
This adjusts the unit further for increased accuracy.
A
ft
er the chime, the Drive Recorder starts con
ti
nuous recording without GPS data. The unit is
recording video and audio as well as vehicle speed, direc
ti
on and loca
ti
on, when: a) when the
vehicle is stopped, the unit shows local
ti
me; b) when the vehicle is in mo
ti
on, it displays the
Unit Prepara
ti
on for video recording
1.
2.
Drive Recorder informs you of your vehicle’s speed, when stopped, the unit it displays the
ti
me.
When the capacity of the SD card has been reached, the oldest files are overwritten for
con
ti
nuous recording. The data recorded by either the unit’s internal G-Sensor or external
manual record bu
tt
on are not overwri
tt
en. (This alarm data must be erased by the User with
the SD card inserted in the computer, erasing event data in the DATA folder.)
When you stop the engine or remove the power cable from the cigare
tt
e lighter plug, T-eye
stops recording.
Con
ti
nous recording while driving
1.
3.
2.
3.
