2
Safety:
The Nolatron Start Bar is not intended for use without adequate “point of
operation” safety guards, which must be provided following OSHA regulations
and ANSI standards to protect the operator. The operator must ensure the bar
is properly installed, inspected and operated. Failure to comply could result in
serious bodily injury and/or property damage.
When properly installed, the Nolatron Start
Bar meets all OSHA requirements for a two-
hand trip device.
Note: The information contained in this manual is for reference purposes only.
The use must determine the compatibility and safety of the Start Bar’s wiring
for each particular machine application.
Do not connect the output from the Start Bar to an input of any other control
device unless it is of a control reliable design. General purpose programmable
controllers (PLCs) are not intended for such an application. Please call Nolatron
at 717-564-3398 for technical assistance on how a PLC can be configured to
operate in conjunction with the Start Bar.
Warning!
This product may cause substantial personal injury or property
damage if it is not installed, maintained and used in accordance
with the manufacturer’s instructions and in accordance with
regulations of the Occupational Safety and Health Administration
Part 1910.217, the procedures prescribed by the American National Standards
Institute B11.1 and B11.19, and all other applicable regulations, procedures,
and codes. The manufacturer shall not be responsible nor liable for any injury
or damage resulting from use of the product in any such applications or the
failure to comply with any such regulation, procedure, or code.
Summary of Contents for TB-2 Series
Page 2: ......
