17
3.5.
Removing the B602 system from the helmet
Fig. 30
Proceed as follows to remove the B602 system
from the helmet:
•
Remove the cheek padding and the shell
gasket.
•
Remove the keypad from the shell, as shown
in Fig. 30.
FOR N87, N80-8, N100-5 HELMENTS ONLY
–
removing the keypad
•
Remove the keypad from the shell, as indicated in Fig. 31.
•
Rotate the keypad in a counterclockwise direction (Fig. 32).
•
Remove the cheek padding and the shell gasket.
Fig. 31
Fig. 32
Fig. 33
•
Unhook the right and left clips from the
shell, levering upward using a flat head
screw (or a similar tool), as shown in figure
33.
Fig. 34
•
Completely remove the B602 system from
helmet using a flat head screwdriver (or
similar tool) and re-install the cheek
padding and the edge gasket.