background image

     LEGAL WARNINGS

► 

When using the device, comply with all applicable laws and regulations. Do not use the 

device in private premises, historic sites and military zones. Notify the authorities of any 

historical or cultural findings.

      WARNINGS ABOUT THE DEVICE

► 

This is a high-tech electronic device. Do not assemble or use the device before reading 

the user manual.

► 

Do not expose the device or the search coil to very hot or cold conditions for extended  

      periods of time. (Storage Temperature: 0°C (32°F) - 40°C  (104°F))

► 

Do not immerse the device or its accessories (except the search coil) in water; do not 

expose them to extreme humid conditions.  

 

► 

Protect the device from external impact, especially during transportation.  

 The device can only be opened and repaired by authorized service technicians. The 

warranty will be voided if the device is opened by you or an unauthorized person.

IMPORT

ANT

IMPORT

ANT

Do not use the device indoors. The device 

will constantly give target signals inside 

places like homes where there are many 

metals present. Use the device outdoors, in 

open fields.

Do not let another detector or an 

electromagnetic device come in close 

proximity (10m (33ft.)) to the device.

Do not carry any metal objects while using 

the device. Keep the device away from your 

shoes while walking. The device may detect 

the metals on you or inside your shoes as 

targets.

For Consumers within the European Union: Do 

not dispose of this equipment in general 

household waste. The crossed wheeled bin 

symbol on this equipment indicates this unit 

should not be disposed of in general household 

waste, but recycled in compliance with local 

government regulations and environmental 

requirements.

FCC STATEMENT 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: (1) this device may not cause harmful interference, 

and (2) this device must accept any interference received, including interferen-

ce that may cause undesired operation.

WARNINGS

FORS / Page 3

www.noktadetectors.com

NOKTA DETECTORS

Summary of Contents for Fors Tech

































Reviews: