Baseband manual tuning guide
Certificate restoring for BB5 products
Context
This procedure is performed when the device certificate is corrupted for some reason.
All tunings (RF & Baseband, UI) must be done after performing the certificate restoring procedure.
The procedure for certificate restoring is the following:
•
Flash the phone with the latest available software using FPS-8 or FPS-10.
Note:
USB flashing does not work for a dead BB5 phone.
•
Create a request file.
•
Send the file to Nokia by e-mail. Use the following addresses depending on your location:
•
APAC: [email protected]
•
CHINA: [email protected]
•
E&A: [email protected]
•
AMERICAS: [email protected]
•
When you receive a reply from Nokia, carry out certificate restoring.
•
Tune the phone completely.
Note:
SX-4 smart card is needed.
•
If the phone resets after certificate restoring, reflash the phone again.
Required equipment and setup:
•
Phoenix
service software v 2007.19 or newer.
•
The latest phone model specific
Phoenix
data package.
•
PKD-1 dongle
•
SX-4 smart card (Enables BB5 testing and tuning features)
•
External smart card reader
Note:
The smart card reader is only needed when FPS-8 is used. FPS-10 has an integrated smart card
reader.
•
Activated FPS-8 flash prommer OR FPS-10 flash prommer
•
Flash update package 03.18.004 or newer for FPS-8 or FPS-10 flash prommers
•
CU-4 control unit
•
USB cable from PC USB Port to CU-4 control unit
•
Phone model specific adapter for CU-4 control unit
•
PCS-1 cable to power CU-4 from external power supply
•
XCS-4 modular cable between flash prommer and CU-4
Note:
CU-4 must be supplied with +12 V from an external power supply in all steps of certificate
restoring.
Steps
1. Program the phone software.
i
Start
Phoenix
and login. Make sure the connection has been managed correctly for FPS-8 or FPS-10.
RM-495; RM-496
BB Troubleshooting and Manual Tuning Guide
Issue 1
COMPANY CONFIDENTIAL
Page 3 –37
Copyright © 2008 Nokia. All rights reserved.
