Nokia RM-94 Service Software And Tuning Instructions Download Page 63

Page: 63 / 68

Issue 1 04/2005

COMPANY CONFIDENTIAL

RM-94

3 - Service Software and Tuning Instructions

Nokia Customer Care

Here you can see an example:

■

Fully automatic calibration, tuning & measurement by Phoenix <Auto-Tune>

Auto-tune is designed to align the phone' s RF part easier and faster, it calibrates, tunes, meas-
ures the following:

•

Rx channel select filter calibration

•

Rx calibration

•

RX band filter response compensation

•

Tx power level tuning

•

Tx I/Q tuning

and saves the results in a log-file, if wanted.

Autotune is a very user-friendly feature, which allows automatic tuning. Preconditions are:

•

Usage of CMU200

•

Usage of XRF-1 cable

•

Usage of the jig MJ-22

There is no need to adjust any value, since all values are correctly pre-defined in the proper file
delivered with the install-packages

Summary of Contents for RM-94


































































Search results

Summary of Contents for RM-94

Reviews:

Brands by name

Popular brands

Nokia RM-94, Service Software And Tuning Instructions

Search results

Summary of Contents for RM-94

Reviews:

Brands by name

Popular brands