you could directly input the Pinyin for next Chinese character. While the
predictive list is already activated, you have to press the right selection key to
close the predictive list first and then continue to input the Pinyin for the next
Chinese character.
Pinyin input example: To input characters for "Pinyin"
1 Enter into the text editing window for writing a text message or any other
possible position for inputting Chinese character, and switch to Pinyin input
mode.
2 Input the Pinyin letter pin for "pin": press
7
,
4
,
6
in sequence, and finally input
*
once for the 1st tone.
3 Scroll right to highlight pin- and then press the scroll key to activate the
candidate list.
4 The character for "pin" will be shown in the candidate list. If this character
locates in the first highlighted position of the candidate list, you could directly
press the scroll key to input it, otherwise, you should first scroll right to highlight
this character and then press the scroll key to input it.
5 After you input the character for "pin", the predictive list will be shown, and the
character for "yin" is shown in the predictive list. You could use the same
method described in item 4 to input this character.
Stroke input method
The strokes are classified according to the following table.
68 Write text
www.nokia.com/support
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black