Camera settings
There are two kinds of settings for the camera: setup settings and main settings.
The setup settings return to the default settings after you close the camera, but the
main settings remain the same until you change them again. To adjust the setup
settings, use the options in the active toolbar. See "Colour and lighting
settings", p. 47. To change the main settings, in the image or video mode, select
Options
>
Settings
.
Still image camera settings
To change the main settings, in the image mode, select
Options
>
Settings
and
from the following:
Image quality
— Set the resolution. The better the image quality, the more
memory the image consumes.
Show captured image
— Select whether to view the captured image after it is
taken or to continue image capturing immediately.
Default image name
— Define the default name for the captured images.
Extended digital zoom
—
On (continuous)
allows the zoom increments to be
smooth and continuous between digital and extended digital zoom,
On (paused)
allows the zoom increments to pause at the digital and extended digital step point,
and
Off
allows a limited amount of zoom while retaining the image resolution. Use
the extended zoom only when getting closer to the subject is more important than
the final image quality. The overall quality of a digitally zoomed image is always
lower than that of an unzoomed image.
Capture tone
— Set the tone that sounds when you capture an image.
Memory in use
— Select where to store your images.
Restore camera settings
— Restore the camera settings to default values.
Colour and lighting settings
In the active toolbar, select from the following:
Camera 47
www.nokia.com/support
Cyan
Cyan
Magenta
Magenta
Yellow
Yellow
Black
Black