73
Date and time
Time
and
Date
—to set the time and date
Time zone
—to set the time zone of your location. If you set
Network operator
time
>
Auto-update
, the local time is shown.
Date format
—to select the format to display dates
Date separator
—to select the date separator
Time format
—to select between 24-hour and 12-hour time format
Time separator
—to select the time separator
Clock type
—to select whether the analog or digital clock is shown in the standby
mode. See “Clock,” p. 65.
Clock alarm tone
—to select the alarm clock tone
Workdays
—to specify days for alarms repeated only on workdays
Network operator time
(network service) — to allow the network to update time,
date, and time zone information to your phone. If you select
Auto-update
, all
active connections are disconnected. Check any alarms as these may be affected.
Enhancement
To change settings of an enhancement, in the
Enhancement sett.
view, scroll to an
enhancement, such as
Headset
, select
Options
>
Open
and from the following
options:
Default profile
—to select the profile you want to activate each time you connect
the enhancement to your phone
Automatic answer
—to set the phone to answer an incoming call automatically
after 5 seconds when this enhancement is connected to your phone. If the
Ringing
type
is set to
Beep once
or
Silent
, automatic answer cannot be used, and you must
answer the phone manually.
Lights
—To set the phone lights continuously on while using the enhancement,
select
On
.
Security
Select
Phone and SIM card
,
Certificate management
, or
Security module
.
Phone and SIM card
You can change the following codes: lock code, (U)PIN code, and PIN2 code. These
codes can only include the numbers from 0 to 9.
