C o n f i g u r e t h e s e t t i n g s
54
Copyright © 2005 Nokia. All rights reserved.
with Bluetooth wireless technology or the DKU-2 data cable available as
a separate enhancement. For more information about PC connectivity,
see the online help of PC Configurator.
Establish a cable connection
1
Open the back cover of the camera, and connect the DKU-2 data
cable to the data connector of the camera and to a PC. See “Figure
3” on page 11.
2
Switch on the camera, and wait until your PC detects the camera.
3
From the PC Configurator main menu, select
File
>
Connection
settings
, and select the correct COM port. Click
OK
.
You can now start using PC Configurator.
Establish a Bluetooth connection
If your PC supports Bluetooth wireless technology, you can connect the
PC to the camera using Bluetooth. For information about starting
Bluetooth on your PC and the Bluetooth address of the PC, refer to the
user guide of your PC or the PC Bluetooth device.
1
Make sure that the Bluetooth radio in the PC is enabled, the PC is
within 10 metres of the camera, and there are no obstacles between
the camera and the PC.
2
Send the following text message to the camera:
83
Bluetooth address of the PC
The camera accepts this message from the master user only.
3
The camera connects to the PC. When the PC prompts for the
Bluetooth passcode, enter the current master user passcode.
If this does not work, do the following:
1
Send the following text message to make the Bluetooth radio of the
camera visible:
81
1
2
Open the Bluetooth device discovery application on your PC. The