27
If the
?
character is shown after the word, the word you intended to write is not in the
dictionary. To add a word to the dictionary, select
Spell
. Enter the word (up to 32 letters),
and select
OK
. The word is added to the dictionary. When the dictionary becomes full, a
new word replaces the oldest added word.
Common functions in traditional and predictive text input
To insert a number, press and hold the number key.
To enter punctuation marks and special characters, press and hold
*
.
To erase a character, press the clear key. To erase more characters, press and hold the
clear key.
To insert a space, press
0
. To move the cursor to the next line, press
0
three times.
■
Copy and delete text
1. To select letters and words, press and hold
#
, and at the same time scroll left or right.
To select lines of text, press and hold
#
, and at the same time scroll up or down.
2. To copy the text, press and hold
#
, and at the same time select
Copy
.
To delete the selected text, press the clear key.
3. To insert the text, scroll to the insertion point, press and hold
#
, and at the same time
select
Paste
.
5. Messaging
Before you can receive or send messages or e-mail, you must have the necessary settings
and access points defined. Contact your service provider for the settings.
■
Write and send messages
Your device supports the sending of text messages beyond the character limit for a single
message. Longer messages are sent as a series of two or more messages. Your service provider
may charge accordingly. Characters that use accents or other marks, and characters from
some language options, take up more space, limiting the number of characters that can be
sent in a single message.
The wireless network may limit the size of MMS messages. If the inserted picture exceeds
this limit, the device may make it smaller so that it can be sent by MMS.
Only devices that have compatible features can receive and display multimedia messages.
The appearance of a message may vary depending on the receiving device.
