Nokia N95 8GB, User Manual

Page: 110 / 344

Make calls
Voice calls
1. In the standby mode, enter the phone number,
including the area code. To remove a number, press
C .
For international calls, press * twice for the +
character (replaces the international access code),
and enter the country code, area code (omit the
leading zero if necessary), and phone number. The
cha as replacement for the international
access code may not work in all regions. In this case,
enter the international access code directly.
2. Press the call key to call the number.
3. Press the end key to end the call (or to cancel the
call attempt).
Pressing the end key always ends a call, even if
another application is active.
To make a call from Contacts, press , and select
Contacts . Scroll to the desired name, or enter the first
letters of the name to the search field. Matching
contacts are listed. To call, press the call key. If you have
saved several numbers for a contact, select the desired
number from the list.
Options during a call
To adjust the volume during a call, use the volume key
on the side of your device. You can also use the scroll
key. If you have set the volume to Mute , select
Unmute first.
To send an image or a video clip in a multimedia
message to the other participant of the call, select
Options
>
Send MMS (in UMTS networks only). You
can edit the message and change the recipient before
sending. Press the call key to send the file to a
compatible device (network service).
To put an active voice call on hold while answering
another incoming call, select Options
>
Hold . To
switch between the active and the held call, select
Options
>
Swap .
To send DTMF tone strings (for example, a password),
select Options
>
Send touch tones . Enter the DTMF
string or search for it in Contacts. To enter a wait
character (w) or a pause character (p), press *
repeatedly. To send the tone, select OK . You can add
DTMF tones to the phone number or DTMF fields in a
contact card.
110
Make call
s