manualshive.com logo in svg

Nokia N 80, User Manual

Share
Download
Nokia N 80 User Manual Download Page 187

• APAC: [email protected]
• CHINA: [email protected]
• E&A: [email protected]
• AMERICAS: [email protected]

• When you receive a reply from Nokia, carry out certificate restoring.
• Tune the phone completely.

Note: 

SX-4 smart card is needed.

• If the phone resets after certificate restoring, reflash the phone again.
Required equipment and setup:
•

Phoenix

 service software v 2004.39.7.70 or newer.

• The latest phone model specific 

Phoenix

 data package.

• PKD-1 dongle
• SX-4 smart card (Enables BB5.0 testing and tuning features)
• External smart card reader

Note: 

The smart card reader is only needed when FPS-8 is used. FPS-10 has an integrated smart card

reader.

• Activated FPS-8 flash prommer OR FPS-10 flash prommer
• Flash update package 03.18.004 or newer for FPS-8 or FPS-10 flash prommers
• CU-4 control unit
• USB cable from PC USB Port to CU-4 control unit
• Phone model specific adapter for CU-4 control unit
• PCS-1 cable to power CU-4 from external power supply
• XCS-4 modular cable between flash prommer and CU-4

Note: 

CU-4 must be supplied with +12 V from an external power supply in all steps of certificate

restoring.

Steps

1. Program the phone software.

i

Start 

Phoenix

 and login. Make sure the connection has been managed correctly for FPS-8 or FPS-10.

ii Update the phone MCU software to the latest available version.

If the new flash is empty and the phone cannot communicate with 

Phoenix

, reflash the phone.

iii Choose the product manually from File

→

Open Product , and click OK.

Wait for the phone type designator (e.g. “RM-1” ) to be displayed in the status bar.

iv Go to Flashing

→

SW Update  and wait until 

Phoenix

 reads the product data as shown in the following

picture.

RM-91; RM-92

BB Troubleshooting and Manual Tuning Guide

Nokia Customer Care

Issue 1

COMPANY CONFIDENTIAL

Page 6 –39

Copyright © 2006 Nokia. All rights reserved.

Summary of Contents for N 80


























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands