Nokia MEDIAMASTER 9760 C, Owner'S Manual, Page: 10 / 36

GB 10
Connecting a HiFi System
• Connect an RCA/Cinch stereo cable from the AUDIO L R sock-
ets on the Mediamaster to the LINE, AUX, SPARE or EXTRA
input sockets on your HiFi system.
• If available you can connect an RCA/Cinch single cable from
the DIGITAL AUDIO socket on the Mediamaster to your HiFi
or Dolby Pro Logic system.
Note: To avoid interference you must use a screened video
cable.
Connecting an Satellite Receiver and VCR
1 Connect a SCART lead between the main SCART socket on
the TV and the TV SCART socket on the Mediamaster.
2 Connect a SCART lead between the TV SCART socket
on the satellite receiver and the AUX SCART socket
on the Mediamaster.
3 If your TV is equipped with two SCART connectors
and the VCR also has a SCART; always use the second
SCART to connect the VCR to the TV.
4 Connect an RF lead from the RF output on the VCR to the TV
aerial input on the TV.
5 Connect an RF lead from the RF output on the satellite re-
ceiver to the RF input socket on the VCR.
6 Connect an RF lead from the TV/VCR output on the Media-
master to the RF input socket on the satellite receiver.
7 Connect an RF lead between the TV AERIAL input socket on
the Mediamaster and the network socket.
8 Connect the coaxial cable between the LNB and the LNB
socket on the satellite receiver.
Both the VCR and the satellite receiver must be tuned to dif-
ferent UHF channels than the Mediamaster when using RF-
connectors.
Satellite
dish
Network
socket
RF
SCART
RF
Media-
master
VCR
LNB
cable
Satellite receiver
The satellite receiver must be switched OFF (in standby
mode) when you want to watch digital cable channels
from the Mediamaster.