Nokia FastMile 2.1.04, Product Overview

Page: 26 / 100

ETSI safety guidelines
26
Nokia FastMile 4G Gateway Product Overview
3TG-00743-ABEA-TCZZA Issue: 02
3.3 Electrical safety guidelines
This section provides the electrical safety guidelines for the Nokia FastMile 4G
Gateway.
The Nokia FastMile 4G Gateway complies with BS EN 61140.
3.3.1 Power supplies
The use of any non-Nokia approved power supplies or power adapters is not
supported or endorsed by Nokia. Such use will void any warranty or support contract
with Nokia. Such use greatly increases the danger of damage to equipment or
property.
3.3.2 Cabling
The following are the guidelines regarding cables used for the Nokia FastMile 4G
Gateway:
•
All cables must be approved by the relevant national electrical code.
•
The Nokia FastMile 4G Gateway must be used with the cabling supplied with the
equipment.
3.3.3 Protective earth
Earthing and bonding of the Nokia FastMile 4G Gateway must comply with the
requirements of local electrical codes.
3.4 ESD safety guidelines
The Nokia FastMile 4G Gateway is sensitive to ESD if opened. Operations personnel
must observe the following ESD instructions when they handle the Nokia FastMile
4G Gateway.
Caution —
This equipment is ESD sensitive if opened. Proper
ESD protections should be used if you open the Nokia FastMile
4G Gateway.