Nokia E72 Service Manual Download Page 36

Page: 36 / 170

SRT-6

Opening tool

SRT-6 is used to open phone covers.

Note:

The SRT-6 is included in the Nokia Standard Toolkit.

SS-210

Camera removal tool

The camera removal tool SS-210 is used to remove/attach the camera

module from/to the socket.

SS-46

Interface adapter

SS-46 acts as an interface adapter between the flash adapter and

FPS-21.

SS-62

Generic flash adapter

base for BB5

•

generic base for flash adapters and couplers

•

SS-62 equipped with a clip interlock system

•

provides standardised interface towards Control Unit

•

provides RF connection using galvanic connector or coupler

•

multiplexing between USB and FBUS media, controlled by VUSB

SS-93

Opening tool

SS-93 is used for opening JAE connectors.

Note:

The SS-93 is included in Nokia Standard Toolkit.

RM-529; RM-530; RM-584

Service Tools and Service Concepts

Page 2 –10

COMPANY CONFIDENTIAL

Issue 1

Summary of Contents for E72











































































































































Search results

Summary of Contents for E72

Reviews:

Brands by name

Popular brands

Nokia E72, Service Manual

Search results

Summary of Contents for E72

Reviews:

Brands by name

Popular brands