Nokia COMMUNICATOR 9210i User Manual Download Page 10

Page: 10 / 290

FOR YOUR SAFETY

Read these simple guidelines. Breaking the rules may be dangerous or illegal.
Further detailed information is given in this manual.

Do not switch the phone on when wireless phone use is prohibited or
when it may cause interference or danger.

ROAD SAFETY COMES FIRST

Don’t use the communicator while driving.

INTERFERENCE

All wireless phones may get interference, which could

affect performance.

SWITCH OFF IN HOSPITALS

Follow any regulations or rules. Switch the

phone off near medical equipment.

SWITCH OFF IN AIRCRAFT

Wireless devices can cause interference in

aircraft.

SWITCH OFF WHEN REFUELLING

Don’t use the phone at a refuelling

point. Don’t use near fuel or chemicals.

SWITCH OFF NEAR BLASTING

Don’t use the phone where blasting is in

progress. Observe restrictions, and follow any regulations or rules.

USE SENSIBLY

Use only in the normal position. Don’t touch the antenna

unnecessarily.

QUALIFIED SERVICE

Only qualified personnel may install or repair phone

equipment.

Summary of Contents for COMMUNICATOR 9210i

































































































































































































































































































Search results

Summary of Contents for COMMUNICATOR 9210i

Reviews:

Brands by name

Popular brands

Nokia COMMUNICATOR 9210i, User Manual

Search results

Summary of Contents for COMMUNICATOR 9210i

Reviews:

Brands by name

Popular brands