manualshive.com logo in svg

Nokia 7368 ISAM ONT E-240W-A, Product Manual

The Nokia 7368 ISAM ONT E-240W-A is a high-performance networking device designed to deliver seamless connectivity. Enhance your browsing experience with its advanced features. Access the user manual for this product for free on our website, ensuring you have all the necessary information to maximize its functionality.

Share
Download
background image

Configure an E-240W-A indoor ONT

104

7368 ISAM ONT E-240W-A Product Guide

3FE-46974-AAAA-TCZZA

Issue: 01

 

Procedure 27

Firewall configuration

1

Select Security > Firewall from the top-level menu in the EPON Home Gateway window, as 
shown in Figure 

43

.

Figure 43

Firewall window

Three security levels are available: Low, Medium, and High.

At the Low level, pre-routing is supported: port forwarding, DMZ, host application, and host 
drop. Also supported are application services: DDNS, DHCP, DNS, H248, IGMP, NTP client, 
SSH, Telnet, TFTP, TR-069, and VoIP.

At the Medium level, pre-routing is supported: port forwarding, DMZ, host application, and 
host drop. Also supported are application services: DDNS, DHCP, DNS, H248, IGMP, NTP 
client, TFTP, TR-069, and VoIP. The following types of ICMP messages are permitted: echo 
request and reply, destination unreachable, and TTL exceeded. Other types of ICMP 
messages are blocked. DNS proxy is supported from LAN to WAN but not from WAN to LAN.

At the High level, pre-routing and application services are not supported. UDP Port 8000 can 
be used to access the services, for example FTP can use 8021 and Telnet can use 8023. 
Regular UDP cannot be used. RG access is permitted via the LAN side but not via the WAN 
side.

Table 

29

 describes the fields in the firewall window.

Table 29

Firewall parameters

Field

Description

Security level

Choose the security level from the drop-down menu: low, medium, or high

(1 of 2)

Release 06.00.00h | January 2019 | Edition 08

Summary of Contents for 7368 ISAM ONT E-240W-A









































































































































Reviews:

No comments

Related manuals for 7368 ISAM ONT E-240W-A

Zonet ZFS3008 Installation Manual preview
ZFS3008
Brand: Zonet Pages: 8
Moxa Technologies UC-8100 Series Hardware User Manual preview
UC-8100 Series
Brand: Moxa Technologies Pages: 19
dixell XT120C Installing And Operating Insructions preview
XT120C
Brand: dixell Pages: 4
ROE EVISON HD101 User Manual preview
EVISON HD101
Brand: ROE Pages: 41
TP-Link Archer VR500vd Installation Manual preview
Archer VR500vd
Brand: TP-Link Pages: 7
WAGO 750-459 Manual preview
750-459
Brand: WAGO Pages: 48
ETL TeleCLIENT TC7730 Series User Manual preview
TeleCLIENT TC7730 Series
Brand: ETL Pages: 83
Nakayo NYC-16VDSL-B Instruction & Installation Manual preview
NYC-16VDSL-B
Brand: Nakayo Pages: 119
Nexxt NOVA300 AML02304U1 User Manual preview
NOVA300 AML02304U1
Brand: Nexxt Pages: 75
ICP DAS USA iWSN-200E Quick Start Manual preview
iWSN-200E
Brand: ICP DAS USA Pages: 8
Penguin Edge MVME2500 Quick Start Manual preview
MVME2500
Brand: Penguin Edge Pages: 2
Patton electronics IPLink 2803 Specifications preview
IPLink 2803
Brand: Patton electronics Pages: 2
Raven RFMOW V2 User Manual preview
RFMOW V2
Brand: Raven Pages: 33
Alfa Network AC1200R Setup Manual preview
AC1200R
Brand: Alfa Network Pages: 11
Xinje VH5 Series User Manual preview
VH5 Series
Brand: Xinje Pages: 76
Juniper WX 100 Quick Start Manual preview
WX 100
Brand: Juniper Pages: 6
NetComm Dynalink 3G8WV Setup Manual preview
Dynalink 3G8WV
Brand: NetComm Pages: 34
Serial Cables PCI-AD-x16HE-BG4 User Manual preview
PCI-AD-x16HE-BG4
Brand: Serial Cables Pages: 18

Brands by name

Popular brands

Load more brands