WW Competence Transfer
CMO Operations & Logistics
Multimedia Creation & Support
CONFIDENTIAL
21.11.2005
14
Service Manual 7360 RM-127
Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
Page
(26)
17. Remove the
UI PWB Holder
including the
UI MODULE
from
the
Engine Module
.
18. Hold the
UI PWB HOLDER
with your fingers. Press the snaps
down with the tweezers and hold it while moving the
UI
MODULE
to the right.
19. Now remove the
UI MODULE
from the
UI PWB HOLDER
.
20. Unscrew the six Torx Plus® size 6 screws in the order shown.
For Assembly use the reverse order.
IMPORTANT:
Torque for used
B-Cover Assy = 23Ncm. Torque for
new
B-Cover Assy = 28Ncm
21. . Use the SS-34 to open the connector of the
LCD MODULE
.
22. Separate the
UI SHIELD ASSY
including the
LCD MODULE
from
the
ENGINE MODULE
.
23. Slightly bend the
UI SHIELD ASSY
and press out the
LCD
MODULE
. Prevent deforming the
UI SHIELD ASSY
24. .Remove the
ENGINE MODULE
from the
B-COVER ASSY
