WCDMA transmitter troubleshooting
Steps
1. Set the phone to local mode.
2. In Phoenix, select Testing
→
WCDMA
→
Tx control . The Tx Control window opens.
Figure 21 Phoenix WCDMA Tx control window
3. Make settings for the band to be tested, according to the following table:
Band
Channel
WCDMA I
9750
WCDMA II
9400
WCDMA V
4183
WCDMA VIII
2788
4. Make the following general settings (the same values for all bands). Note that Max power limit is not
checked by default.
RM-598; RM-604
RF Troubleshooting
Issue 1
COMPANY CONFIDENTIAL
Page 4 –21
Copyright © 2009 Nokia. All rights reserved.