Nokia 6710 Navigator RM-491
Service Manual Level 1&2
13
Confidential
Copyright © 2009 NOKIA
All rights reserved
Version 1.0
ISSUE 1
7) Carefully release the two clips with the SS-93.
Insert the SS-93 between the upper and lower block
and lift the upper block slightly. Be careful with the
components underneath.
8) Use the SS-93 to disconnect the MAIN FLEX from
the engine board. While opening the connector, be
careful to not to damage it!
9) The upper block can now be separated.
10) Use the SS-93 to disconnect the CONNECTING
FLEX from the engine board. Be careful with the
components around the connector! Then separate
the UI BOARD ASSEMBLY.
11) To disconnect the CONNECTING FLEX, first open
the locking mechanism of the connector with the
SS-93. Then separate the flex. Be careful not to
damage the connector.
12) Detach the ALPHA DOMESHEET with the dental
tool. Be aware of the sharp point of the dental tool -
be careful to not to injure yourself. The ALPHA
KEYMAT ADHESIVE and the ALPHA DOMESHEET cannot
be reused.
