3. Click Start and Tune.
4. Setup the signal generator to correspond the values in the "RX AGC Calibration" pop-up window and click OK:
Frequency:
2141MHz
Level:
–51 dBm + cable and adapter attenuations
Modulation:
FM
Deviation:
500 kHz
Modulation frequency:
50 kHz
5. Check that the “Rx Chain” value in “Tuning Results” is within the limits presented in the following table.
Min
Typ
Max
Unit
RX chain
-6
1.5 3.5
6
dB
Low freq
-5
-0.7 4.0
5
High freq
-5
-0.7 4.0
5
i If the Rx gain is acceptable, click Yes to save the results to the phone.
6. To close the tuning window, click Close.
RM-36
Nokia Customer Care
RF Troubleshooting and Manual Tuning Guide
Page 7–46
Company Confidential
Issue 1
Copyright ©2005 Nokia. All Rights Reserved.
Summary of Contents for 6680 RM-36
Page 479: ...www s manuals com ...
