Copyright © 2005 Nokia. All rights reserved.
Tools
97
Packet data conn.
—If you select
When available
and you
are in a network that supports packet data, the phone
registers to the packet data network. Also, starting an
active packet data connection is quicker (for example, to
send and receive e-mail). If you select
When needed
, the
phone uses a packet data connection only if you start an
application or action that needs it. If there is no packet
data coverage and you select
When available
, the phone
periodically tries to establish a packet data connection.
Access point
—The access point name is needed to use your
phone as a packet data modem to your computer.
Configurations
You may receive trusted server settings from your network
operator or service provider in a configuration message, or
the settings may be stored on your SIM or USIM card. You
can save these settings to your phone, view or delete them
in
Configurations
.
Date and time
See
"Clock settings"
on page
16
.
See also the language settings in
"General"
on page
92
.
Security
Phone and SIM
PIN code request
—When active, the code is requested
each time the phone is switched on. Deactivating the
personal identification number (PIN) code request may not
be allowed by some SIM cards. See
"Glossary of PIN and
lock codes"
on page
98
.
PIN code
,
PIN2 code
, and
Lock code
—You can change the
lock code, PIN code, and PIN2 code. These codes can only
include the numbers from
0
to
9
. See
"Glossary of PIN and
lock codes"
on page
98
.
Avoid using access codes similar to the emergency
numbers to prevent accidental dialling of the emergency
number.
If you forget any of these codes, contact your service
provider.
Autolock period
—You can set an autolock period, a time-
out after which the phone automatically locks and can be
used only if the correct lock code is entered. Enter a
number for the time-out in minutes, or select
None
to turn
off the autolock period.
To unlock the phone, enter the lock code.
