Copyright © 2005 Nokia. All rights reserved.
Messaging
60
Receive report
(network service)—Select
Yes
if you want
the status of the sent message to be shown in the Log.
Note:
Receiving a delivery report of a multimedia
message that has been sent to an e-mail address
might not be possible.
Deny report sending
—Select
Yes
if you do not want your
phone to send delivery reports of received multimedia
messages.
Message validity
—If the recipient of a message cannot be
reached within the validity period, the message is removed
from the multimedia messaging centre. The network must
support this feature.
Maximum time
is the maximum
amount of time allowed by the network.
Tip!
You may also obtain the multimedia and e-mail
settings from your service provider through a
configuration message. Contact your service
provider for more information. See
"Data and
settings"
on page
53
.
Select
Messaging
>
Options
>
Settings
>
, or in
the mailbox main view, select
Options
>
E-mail settings
,
and select from the following:
Mailbox in use
—Select which mailbox you want to use for
sending e-mail.
Mailboxes
—Opens a list of mailboxes that have been
defined. If no mailboxes have been defined, you are
prompted to do so. Select a mailbox to change the
settings:
Mailbox settings
:
Mailbox name
—Enter a descriptive name for the mailbox.
Access point in use
(
Must be defined
)—Choose an
Internet access point (IAP) for the mailbox. See
"Connection settings"
on page
94
.
My e-mail address
(
Must be defined
)—Enter the e-mail
address given to you by your service provider. Replies to
your messages are sent to this address.
Outgoing mail server
(
Must be defined
)—Enter the IP
address or host name of the mail server that sends your
e-mail. You may only be able to use the outgoing server of
your network operator. Contact your service provider for
more information.
Send message
—Define how e-mail is sent from your
phone. Select
Immediately
for the device to connect to the
mailbox when you select
Send message
. Select
When
conn. avail.
—E-mail is sent when the connection to the
remote mailbox is available.
User name
—Enter your user name, given to you by your
service provider.
