manualshive.com logo in svg

Nokia 638, User Manual

Share
Download
Nokia 638 User Manual Download Page 46

CGH-3 Light Desktop Stand

The Light Desktop Stand provides
you with a compact solution to
keep your phone in a ready-to-use,
upright position.

Connect your charger to the stand and into an AC
wall outlet. Place your phone in the stand and check
the charging status on the phone display.

The Light Desktop Stand can be used together with
the Standard Travel Charger ACH-8U or Rapid Travel
Charger ACH-6U. The charging time for a phone
manufacturer approved 470 mAh battery is about 1
hour and 30 minutes or 45 minutes, respectively. The
charging time for a phone manufacturer approved 950
mAh battery is about 4 hours 30 minutes or 1 hour 30
minutes, respectively.

LCH-6 Rapid Cigarette Lighter Charger

The multivoltage Rapid Cigarette
Lighter Charger ensures that you
can charge your phone battery
wherever you travel. Its stylish and
functional design fits well in most
car interiors.

Plug the charger into your car’s cigarette lighter
socket and connect the lead to the bottom of your
phone. A green light indicates that the charger is
ready to charge. Check the charging status on the
phone display.

The charging time for a phone manufacturer ap-
proved 470 mAh battery is about 45 minutes and for
a 950 mAh battery about 1 hour 30 minutes. Calls
can be made during the charging.  The input voltage
can be 12 or 24 V DC, negative grounding.

Avoid prolonged charging with the Rapid Cigarette
Lighter Charger when the car engine is not running.
This may cause the battery of your car to drain. 

Note: In some cars the cigarette lighter plug is not
provided with electricity if the ignition is switched off.
Verify that the green LED light is on.

NHA-4NG Nokia 638_AU 
Authentication version
US English 9351137
Issue 3

Version: 0.7, Date: 11 (2) Dec.
1996
Status: ToL, JaK, JaG, SIR, JoF

45

Summary of Contents for 638




















































Reviews:

No comments

Brands by name

Popular brands

Load more brands