Nokia 6275i, User Manual

Page: 35 / 209

S e t t i n g s
34
To view the transferred item immediately from the standby mode, select Show .
To view the item later, select Exit .
The item is saved in the appropriate menu in your phone. For example, a business
card is saved in
Contacts , and a calendar note is saved in Calendar .
Infrared connectivity
You can set up the phone to receive data through its infrared (IR) port. To use an
IR connection, transmission and reception must be to or from an IR compatible
phone or device. Your device cannot send or receive images, photos, videos,
music or ringing tones through IR connectivity between phones or other devices.
Do not point the IR beam at anyone’s eye or allow it to interfere with other IR
devices. This device is a Class 1 laser product.
Send and receive data
1. Ensure that the IR ports of the sending and receiving devices are pointing
at each other and that there are no obstructions between the devices.
The preferable distance between the two devices in an IR connection is from
7.62 centimeters to 0.91 meters (3 inches to 3 feet).
2. To activate IR in your phone, select Menu > Settings > Connectivity > Infrared .
3. The user of the other device must also activate IR.
If data transfer is not started within 2 minutes after the activation of the IR port,
the connection is canceled and must be restarted. The phone does not support
sending files from the gallery directly to another phone or device via IR. It is not
possible to receive images, photos, videos, music, or ringing tones via IR
connection from other phones or devices.
Connection indicator
• When is shown continuously, the IR connection is activated and your
phone is ready to send or receive data using its IR port.
• When blinks, your phone is trying to connect to the other device
or a connection has been lost.
Data cable transfer
To transfer data from your phone to a compatible PC or from a compatible PC to
your phone, use a CA-53 USB data cable. To disconnect the cable from the device,
hold the connector, and remove the cable.
Disconnect the USB data cable from the phone to make a call.