manualshive.com logo in svg

Nokia 6, Product Manual

Share
Download
Nokia 6 Product Manual Download Page 20

ANSI CPE safety guidelines 

Nokia WiFi Beacon 6 Product Guide

 

0 3FE-47429-AAAA-TCZZA 

Issue: 

01

 

 

 

can be determined by turning the equipment off and on, the user is encouraged to 
try to correct the interference by one or more of the following measures: 

 

• 

Reorient or relocate the receiving antenna. 

 

• 

Increase the separation between the equipment and receiver. 

 

• 

Connect the equipment into an outlet on a circuit different from that to which the 
receiver is connected. 

 

• 

Consult the dealer or an experienced radio/TV technician for help. 

 

2.2.4  FCC Radiation Exposure Statement

 

This device complies with FCC radiation exposure limits set forth for an 

uncontrolled environment and it also complies with Part 15 of the FCC RF Rules. 
This equipment must be installed and operated in accordance with provided 
instructions and the antenna(s) used for this transmitter must be installed to 
provide a separation distance of at least 26cm from all persons and must not be 
co-located or operating in conjunction with any other antenna or transmitter. End-
users and installers must be provided with antenna installation instructions and 
consider removing the no-collocation statement.  

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions: 

 

1  this device may not cause harmful interference, and 

 

2  this device must accept any interference received, including interference that 

may cause undesired operation. 

 

Caution —  

Any changes or modifications not expressly 

approved by the party responsible for compliance could void the 
user's authority to operate the equipment. 

 

2.2.5  Resistibility requirements compliance

 

The Beacon 6 complies with the requirements of ITU Recommendation K.21 for 

resistibility of telecommunication equipment installed in customer premises to 
overvoltage and overcurrents.

 

Summary of Contents for 6


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands