T o o l s
74
Copyright © 2006 Nokia. All rights reserved.
Message text
— to enter a text to
be sent when you reject a call with
a text message
Automatic redial
— to set the
phone to make a maximum of 10
attempts to connect the call after
an unsuccessful call attempt. Press
the end key to stop automatic
redialing.
Summary after call
— to set the
phone to briefly display the
approximate duration of the last
call
Speed dialling
>
On
— to set the
phone to dial the numbers
assigned to the speed dialing keys
2
to
9
by pressing and holding the
corresponding number key
Anykey answer
>
On
— to answer
an incoming call by briefly
pressing any key, except the right
selection key, the power key,
volume keys, the push to talk key,
and the end key
Line in use
(network service) —
this setting is shown only if the
SIM card supports two subscriber
numbers, that is, two phone lines.
Select which phone line (
Line 1
or
Line 2
) you want to use for making
calls and sending short messages.
Calls on both lines can be
answered irrespective of the
selected line. You cannot make
calls if you select
Line 2
and have
not subscribed to this network
service. To prevent line selection,
select
Line change
>
Disable
if
supported by your SIM card. To
change this setting, you need the
PIN2 code.
Connection
Your phone supports packet data
connections , such as GPRS in
the GSM network. See
“Indicators”
p.
26
. To establish a data
connection, an access point is
required. You can define different
kinds of access points:
• MMS access point to send and
receive multimedia messages
• Access point for the Web
application to view WML or
XHTML pages
• Internet access point (IAP) (for
example, to send and receive
e-mail)
Check which kind of access point
you need with your service
provider for the service you wish
to access. For availability and
subscription to packet data
connection services, contact your
network operator or service
provider.
Receive access point settings
You may receive access point
settings in a message from your
