Nokia 50i, Installation Manual, Page: 34 / 58

3
Performing the Initial Configuration
34 Nokia 50i Installation Guide
4.
If you are using a flash memory card, insert the flash memory card into
the primary flash memory card slot.
The Nokia 50i has slots in the front panel for flash cards.
Note
Nokia recommends that you use the internal flash memory on the
gateway instead of using the flash memory card.
a. Align the card with the slot so that the connector is inserted first.
b. Gently slide the card into the slot and press until you feel it seat into
the slot. If the card does not insert all the way, flip it over and reinsert
it.
5. Make sure that you have a terminal emulator configured with the settings
described in
“Connecting the Console Port” on page 31.
6.
Turn on power to the gateway.
Continue to “Connecting Power and Turning the Power On” on page 36.
Console Pin Assignments
Use the built-in console port to supply the information that makes the gateway
available on the network. Use the built-in serial port (AUX) for RS232-
compliant equipment you are using with your gateway; for example, as a
modem connection for managing the gateway.
Figure 10 on page 35 provides
pin assignment information for console and serial connections.