22
Copyright
©
2006 Nokia. All rights reserved
.
You can remove or replace the microSD card during phone operation without switching the phone off.
1. Turn the key part of the phone to reveal the microSD card slot.
2. Open the microSD card slot cover, and follow the instructions on the display.
3. Remove (or replace) the microSD card, and close the card slot cover.
■
Charge the battery
1. Connect the charger to the wall socket.
2. Connect the lead from the charger to the charger connector in the phone.
If the battery is completely discharged, it may take a few minutes before
the charging indicator appears on the display or before any calls can be
made.
The charging time depends on the charger and the battery used. Charging a
BP-6M battery with the AC-3 charger takes approximately 3 hours and with
the AC-4 charger approximately 2 hours.
■
Switch the phone on and off
Press and hold the power key as shown.
If the phone asks for a PIN code, enter the PIN code, and select
OK
.
If the phone asks for the lock code, enter the lock code, and select
OK
. The factory
setting for the lock code is 12345.