101
Copyright
©
2006 Nokia. All rights reserved
.
Date separator
— to select the date separator
Time format
— to select between 24-hour and 12-hour time format
Time separator
— to select the time separator
Clock type
— to select whether the analog or digital clock is shown in the standby or active standby mode.
See
Clock alarm tone
— to select the alarm clock tone
Network operator time
(network service) — to allow the network to update time, date, and time zone
information to your phone. If you select
Auto-update
, all active connections are disconnected. Check any
alarms as these may be affected.
Security
Phone and SIM
You can change the following codes: lock code, PIN code, and PIN2 code. These codes can only include the
numbers from 0 to 9.
Avoid using access codes similar to emergency numbers, to prevent accidental dialing of the emergency
number.
To set the security settings, select
Menu
>
Tools
>
Settings
>
Security
>
Phone and SIM
and from the following
options:
Code in use
— to select the active code,
PIN
or
UPIN
, for the active USIM. This is shown only if the active USIM
supports UPIN, and the UPIN is not rejected.
PIN code request
(or
UPIN code request
) — to set the phone to request the code each time the phone is
switched on. Some SIM cards may not allow the PIN code request to be turned
Off
. If you select
Code in use
>
UPIN
,
UPIN code request
is shown instead.
PIN code
(or
UPIN code
) /
PIN2 code
/
Lock code
— to change the codes