manualshive.com logo in svg

Nokia 3155i, User Manual

Share
Download
Nokia 3155i User Manual Download Page 18

S e t   u p   y o u r   p h o n e

18

For availability of approved enhancements, please check with your dealer. 

When you disconnect the power cord of any enhancement, grasp and pull the 

plug, not the cord.

■

Turn your phone on or off

1. To turn your phone on or off, press and hold the end key for at least 4 seconds.

2. Enter the lock code, if necessary, and select 

OK

. See "Change lock code," p. 65.

Warning:

 Do not switch the phone on when wireless phone use is 

prohibited or when it may cause interference or danger.

■

Connect the headset

A compatible headset, such as HS-5 or HS-9, may be purchased with your phone, 
or separately as an enhancement. See "Enhancements," p. 84.

1. Plug the HS-5 headset connector into 

the Pop-Port connector at the bottom 

end of your phone or, plug the HS-9 

headset connector into the 2.5 mm 

headset jack located on the side of 

your phone to allow hands-free 

operation.

 appears in the standby mode.

2. Position the headset on your ear.

With the headset connected, you can 
make, answer, and end calls as usual.

•

Use the keypad to enter numbers.

•

Press the call key to place a call. See 

"Phone at a glance," p. 10.

•

Press the end key to end a call.

■

Make a call

Note:

 Before making or receiving a call, fully extend the whip antenna.

Summary of Contents for 3155i































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands